4 Checking and Performing Printer Adjustments
47
S84-ex/S86-ex Service Manual
4 The adjustment mode shows. Press the
/ buttons to select the item you want to
set. Then press the / buttons to
change the value.
You can set the items as follows.
• PITCH POSITION
• OFFSET POSITION
• DARKNESS
Refer to Chapter 4 Operation and Configuration
of the S84-ex/S86-ex operator manual for more
details.
5 Press the ENTER button to start the test
print.
Press the ENTER button again to pause the
print.
To stop the test print, first pause the print and then
press the FUNCTION button.
4.4
Adjusting the Print Position
Refer to Section 5.3.2 Adjusting the Print Position in S84-ex/S86-ex operator manual for details.
Adjustment Location Adjustment Range
Adjustment Mode: Pitch Position +3.75 mm to -3.75 mm
(+0.15” to -0.15”)
To Next Page
Loading...
