40
TC Series - User’s Manual
Steps:
1. Turn off the printer. Plug the power cord into the power outlet, and
then connect the other end of the cord to printer's power
connector. Connect a USB cable to the USB port on printer and also
on your computer.
2. Turn on the printer. If the printer supports Plug-and-Play, and you
have successfully connected it using a USB cable, then the
Windows Add Hardware Wizard will automatically detect the
printer and display a dialog that allows you to install a driver. Click
Cancel and do not install the driver using this wizard.
3. Prepare the documentation and software CD from printer package
and then install to CD drive of your computer. Choose Seagull
Driver version and then start installation:
Another way to install Seagull driver is to run the DriverWizard
utility from the Installation Directory where the Seagull driver files
are located.
To Next Page
Loading...
