46
TC Series - User’s Manual
Installing a Printer Driver (for other interfaces except USB)
Steps:
1. Turn off the printer. Plug the power cord into the power outlet, and
then connect the other end of the cord to printer's power
connector. Connect the Parallel cable or Serial cable to the proper
port on the printer and also on your computer.
2. Prepare the documentation and software CD from printer package
and then install to CD drive of your computer. Choose Seagull
Driver version and then start installation:
Another way to install Seagull driver is to run the DriverWizard
utility from the Installation Directory where the Seagull driver files
are located.
To Next Page
Loading...
