SATO TC408X - Buttons

30
TC Series - User’s Manual
Buttons
There are three buttons. Each button carries with two basic functions.
Button
Function 1
(Press the button)
Function 2
(Press the button and
power on printer at the same
time)
FEED
/
CONFIG.
 Feed a label.
Perform self test & print a
configuration report.
PAUSE
/
CALIBR.
 Pause printing.
 Press again to resume
printing.
Perform a media calibration.
CANCEL
/
RESET
 Interrupt and delete a print
task.
 Force printer to continue
after an error is solved.
Reset to factory default
settings.