6 SATO WS4 Printer Utility Work with SATO WS4 Printer Utility
67
• If you don’t have a static IPv6 address, in the Mode list, click DHCPv6; in the
Address Type list, click Normal, and click Send.
2. After your printer restarts, click Get to get its IPv6 information. If you are using a
static IPv6 address, you’ll get the same settings as it is in the previous step; if
you are using DHCPv6, the DHCPv6 server will automatically populate the IP
Address and Link-Local Address boxes under Current IPv6.
To Next Page
Loading...
