6 SATO WS4 Printer Utility Work with SATO WS4 Printer Utility
68
3. In the Input/Output Port list, click LAN, and click Setting.
4. In the Setting LAN dialog box, do one of the following to configure your IP
address:
∙ If you are using a static IP address, in
the IP Address box, enter the IP
address under IPv6 in the IPv6 tab and
click OK.
∙ If you are using a dynamic IP address
provided by DHCPv6, in the IP Address
box, enter the IP address under
Current IPv6 in the IPv6 tab and click
OK.
Note: If your IPv6 address has consecutive zeros, you can use a double-
colon to compress them. For example, if your address is
2607:f0d0:1002:0051:0000:0000:0000:0006, you can shorten it like this:
2607:f0d0:1002:0051::0006. Remember that the double-colon can
appear only once in the address. The leading zeros in a section can also
be removed, so the shortest version of your address can be written as
2607:f0d0:1002:51::6.
To Next Page
Loading...
