SATO WS412DT - Page 12

8
2) Cancel request command
This command enables to cancel the print jobs and clear the entire contents of receive buffer.
The printer status after completing this process is returned.
(1) Command CAN(HEX 18H)
(2) List of return status
Return status
Description
ACK(HEX 06H)
No error in the printer
NAK(HEX 15H)
Error in the printer
＊ Important
After sending the cancel request command, wait more than 100ms before sending the next data.
3) Request command to pause printing
This command stops the print job.
The printer status after completing this process is returned.
(1) Command DLE(HEX 10H)
(2) List of return status
Return status
Description
ACK(HEX 06H)
No error in the printer
NAK(HEX 15H)
Error in the printer
4) Request command to resume printing
This command enables the printer to exit the pause state and restart the print job.
The printer status after completing this process is returned.
(1) Command DC1(HEX 11H)
(2) List of return status
Return status
Description
ACK(HEX 06H)
No error in the printer
NAK(HEX 15H)
Error in the printer
* Note
For the Job ID Number command, refer to the Command Specifications.