Saturn 2003 Ion User Manual

10. Drill out all the spot welds along rails and the
wheelhouses rearward of the cutline and remove
the rear compartment floor panel. Note the
number and location of welds for installation of
the service assembly.
11. Cut and grind flush the original panel of the rear
compartment panel at the rear edge of the #5
crossbar.
Installation Procedure
1. On the rear compartment floor panel service part,
locate the transition area from the floor pan to the
drop-down area which supports the rear seat
bottom half.
2. Place a piece of masking tape along the top
radius within this transition area across the panel
811150
877233
872726
3-128 2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English