Saturn 2003 Ion User Manual

Important: Note the number and location of the
factory welds for installation of the rear end panel.
6. Locate and drill out all the necessary
factory welds.
7. Remove the rear end panel.
Installation Procedure
(Metal-Inert Gas (MIG) Welding)
Important: If the location of the original plug weld
holes can not be determined, space the plug
weld holes every 40 mm (1
1
⁄ 2 in) apart.
1. Drill 8 mm (5/16 in) plug weld holes in the service
part as necessary in the locations noted from the
original panel.
2. Prepare all mating surfaces as necessary.
3. Apply 3M
®
Weld-Thru coating P/N 05916 or
equivalent to all mating surfaces.
789111
789112
789114
2003 Saturn Ion 3-163
2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English