Saturn 2003 Ion User Manual

4. Position the rear end panel on the vehicle. Use
3-dimensional measuring equipment to inspect
the panel.
5. Clamp the panel in place.
6. Plug weld accordingly.
7. Clean and prepare all of the welded surfaces.
8. Install all of the related panels and components.
9. Apply the sealers and anti-corrosion materials
to the repair area, as necessary.
10. Paint the repaired area.
11. Connect the negative battery cable.
12. Enable the SIR system.
789112
789116
3-164 2003 Saturn Ion

Saturn 2003 Ion Specifications

General

Brand	Saturn
Model	2003 Ion
Category	Automobile
Language	English