14. Connect the right/pretensioner connector.
15. Install the connector position assurance (CPA) to
the right/pretensioner connector.
16. Install the right lower center pillar.
17. Connect the passenger/right roof rail module
yellow connector to the vehicle harness yellow
connector.
18. Install the CPA to the right roof rail module yellow
connector.
19. Install the garnish molding to the upper lock pillar.
20. Install the AIR BAG fuse into the body control
module fuse center.
21. Install the body control module fuse center cover.
22. Use caution while reaching in and turn the
ignition switch to the ON position.
The AIR BAG indicator will flash then turn OFF.
23. Perform the SIR Diagnostic System Check if the
AIR BAG warning indicator does not operate as
described.
899818
899820
893538
3-186 2003 Saturn Ion
To Previous Page
Loading...
