Saturn 2003 Ion - Page 185

5. Connect the left/driver pretensioner connector.
6. Install the connector position assurance (CPA) to
the left/driver pretensioner connector.
7. Install the left/driver lower center pillar.
8. Connect the left/driver roof rail module yellow
connector to the vehicle harness yellow connector.
9. Install the CPA to the left roof rail module yellow
connector.
10. Install the left outer trim cover.
11. Connect the passenger/I/P module yellow
connector (1) to the vehicle harness yellow
connector (2).
12. Install the CPA to the I/P module yellow
connector (1).
13. Install the passenger/right outer trim cover to the
instrument panel (I/P) (3).
899818
899820
816857
2003 Saturn Ion 3-185
2003 Saturn Ion