Savant S2 Deployment Guide

Savant S2/2000 Deployment Guide Copyright © 2019 Savant Systems, LLC
009-1914-00 | 191231 10 of 24
5. Blueprint Configuration
When a Blueprint configuration is created, a Host is automatically added to the Zone Component List, however it is not added to the Layout view. The Host
for configuration must be placed in the Layout view in order for services to be generated.
NOTE: If the Host at the top of the Zone Component List is not an Host with Control the steps outlined in Replacing a Host in a Configuration before adding
the Host to the Layout view.
Required Devices
– SHR-S2 or SHR-2000 Host
Optional Devices
– IR Controllable Devices
– Serial (RS-232) Controllable Devices
– Contact Closure (Relay) Controllable Devices
– Voltage Trigger (GPIO) Controllable Devices
– IP (Ethernet) Controllable Devices

Savant S2 Specifications

General

Brand	Savant
Model	S2
Category	Controller
Language	English