Savant S2/2000 Deployment Guide Copyright © 2019 Savant Systems, LLC
009-1914-00 | 191231 21 of 24
8.3. Uploading Configuration to the Host
To upload a Blueprint configuration to a Savant Host, the recommended methods are to use either the Upload to Master button from the main
Blueprint taskbar, or the Upload button in System Monitor. If neither of these methods are available for any reason, configuration files can be
uploaded to the Host via the command line following the steps listed below.
1. Launch the Savant Application Manager (SAM).
2. Select the appropriate da Vinci release for the Host and click Activate.
3. Open System Monitor by selecting it in the right side menu.
4. In an open System Scanner window, select the Savant Smart Host.
5. Click Upload to start the upload process.
6. Click Browse and then navigate to the SDE folder containing the configuration file to upload.
7. Select the configuration file in the folder and click Open.
8. In the open dialog showing the selected file, click Upload.
8.4. Copying the Configuration File to the SDE
The preferred method for downloading configurations to the SDE is using the Get Config button in System Monitor.
1. Launch the Savant Application Manager (SAM) on the SDE, and click Activate next to the desired release if necessary.
2. Open System Monitor by selecting it from the right side menu.
3. Select the Host from the list.
?
Local Network
Dersden45Host Dersden45 Host
System NameDevice Name
Scanner
Connect
Terminal View Logs Get Logs Get Config
4
4. Click Get Config on the top menu bar.
5. A dialog window will open to save the configuration file that provides the following options:
6. Save As: Select a name that identifies the file.
Example: SmartHost_2016-03-22-102552_config.tgz
Where:
Tags:
Save As:
Dersden45Host_2019-12-25-102553_conf
Downloads
Cancel Download
7
8
7. Where: Location to Save the configuration.
8. Download: Click to download the configuration.
To Next Page
Loading...
