Savant S2 - 7 Running Scripts; Recalling Script Files

Savant S2/2000 Deployment Guide Copyright © 2019 Savant Systems, LLC
009-1914-00 | 191231 17 of 24
7. Running Scripts
Custom workflows and scripts created within Blueprint are copied to the Host when the configuration is uploaded. However, scripts that are created
outside of Blueprint using Automator or Linux will need to be copied to the Host for the system to access them. These items will need to be placed on the
Host by using SSH commands.
NOTE: This section includes a number of SSH commands which can be input into Terminal or other command line applications. Copying and pasting
command syntax directly from this document may result in formatting errors being introduced during the transfer. Check all copied commands
carefully to ensure their functionality.
IMPORTANT! S2/2000 Hosts can only run scripts containing Savant Commands, located under Actions > Other within Automator. Scripts utilizing
Applescript or other Mac commands should never be copied to S2/2000 Hosts, as they are not supported, will not function, and may render the
system unresponsive.
7.1. Recalling Script Files
Scripts added via Blueprint using the Customer Files [bold] folder accessed through the Tools > Customer and Provider Info [bold menu path] dialog
are stored in a dierent location within the Host filesystem for S2/2000 Host types than with a Savant Pro Host.
Refer to Tools Menu - Channel Listings Editor, Customer and Provider Information: RacePoint Blueprint Programming Guide located on the Savant
Customer Community for details on adding Customer Files.
CancelCustomer Files...
OK
Customer Files folder access in
Tools > Customer and Provider Info dialog.
Files that have been added to Customer Files are located under the following path on the Host:
/home/RPM/GNUstep/Library/ApplicationSupport/RacePointMedia/userCong.rpmCong/CustomerFiles