Savant S2 - Page 16

Savant S2/2000 Deployment Guide Copyright © 2019 Savant Systems, LLC
009-1914-00 | 191231 16 of 24
Set to Static:
setIPAddress -static -address x.x.x.x -netmask x.x.x.x -gateway x.x.x.x
Substitute x.x.x.x with the appropriate addresses.
A message will appear to confirm the requested change. After confirming (y), the
connection to the Host will be lost as the IP address has changed. Close the Terminal
window after confirming and entering password for Host RPM user.
Add a DNS Server
Address to the list:
setDNSServer -add -address x.x.x.x
Substitute x.x.x.x with the appropriate addresses.
Remove a DNS Server
Address from the list:
setDNSServer -remove -address x.x.x.x
Substitute x.x.x.x with the appropriate addresses.
Query Current DNS
Server Information:
setDNSServer
Example of Terminal Window:
> setDNSServer
Current DNS Servers:
servername 8.8.8.8
servername 8.8.4.4