Delivering Scan Files
94
4
Simultaneous Storage and Delivery
This section explains how to store a file and simultaneously deliver it.
A Press [Store File].
B Make sure that [Send & Store] is selected.
C If necessary, specify the stored file's information, such as [User Name], [File
Name], and [Password].
For details, see “Specifying File Information for a Stored File”.
D Press [OK].
E Specify the destination, make any other necessary settings, and then send
the file.
For details about delivering a file, see "Basic Operation for Delivering Files".
Note
❒ Depending on the security setting, [Access Privileges] may appear instead
of [User Name]. For details about specifying [Access Privileges], consult your
administrator.
❒ You can resend stored files. To resend stored files, select the files on the
screen for selecting stored files, and then send them. For details, see "Send-
ing a Stored File".
Reference
p.63 “Specifying File Information for a Stored File”
p.83 “Basic Operation for Delivering Files”
p.71 “Sending a Stored File”
To Next Page
Loading...
