Savin 8025e - Selecting the Sender by Entering the Registration Number

Specifying the Sender
91
4
Selecting the Sender by Entering the Registration Number
Select a sender by entering its Short ID number (registered using the ScanRouter
delivery software). For details about how to set Short IDs, see the manuals sup-
plied with the ScanRouter delivery software.
A Press [Attach Sender's Name].
B Using the number keys, enter the three-digit registration number assigned
to the required destination folder.
If the entered number is less than three digits, press the {q} key after the last
number.
Example: To enter 006
Press the {6} key, and then press the {q} key.
C Press [OK].