Technical data
OPM 300 en-GB 107
© Scania CV AB 2020, Sweden
Technical data
General data
Lubrication system
Number of cylinders and configuration V 8
Working principle 4-stroke engine
Cylinder diameter (mm/in) 130/5.118
Piston stroke (mm/in) 154/6.06
Displacement (dm
3
/inch
3
)
16.4/1,001
Firing sequence 1 - 5 - 4 - 2 - 6 - 3 - 7 - 8
Compression ratio
DC16 084A/384A 17.4:1
Other engine types 16.7:1
Engine direction of rotation viewed from rear Anti-clockwise
Fan direction of rotation viewed from front Clockwise
Cooling Coolant
Valve clearances, cold engine
Intake valve (mm/in) 0.45/0.017
Outlet valve (mm/in) 0.70/0.027
Number of teeth on the flywheel 158
Low idling speed (rpm) 500-975
Maximum full-load speed (rpm) 1,800/2,100
Fuel Diesel
Approximate weight, without coolant and oil (kg/lb)
DC16 084A/384A 1,375/3,031
Other engine types 1,340/2,954
Oil volume See Maintenance
Oil cleaning Centrifugal oil cleaning
Oil cooler Coolant cooled, full flow
Oil filter Paper filter from Scania
Interval between oil changes (h) 500
Oil pressure (bar/psi)
Normal with the engine at operating temperature, operating speed 3-6/43.5-87
Minimum permitted at idling speed 0.7/10.2
Crankcase pressure with closed crankcase ventilation (mbar/psi) -5.4 to 2.0/-0.08 to 0.03
To Next Page
Loading...
