Scania DC16 - Bleeding the Fuel System

Fuel system
OPM 300 en-GB 80
© Scania CV AB 2020, Sweden
Bleeding the fuel system
IMPORTANT!
The collected fuel must not be poured back into
the fuel tank.
Environment
Use a suitable container. The fuel collected must
be disposed of as specified in national and inter-
national laws and regulations.
Bleeding the fuel system using a suc-
tion tool
Note:
Scania recommends bleeding the fuel system us-
ing suction tools rather than with a hand pump.
This is a quicker and simpler method, which en-
sures a complete bleeding.
1. Open the bleed nipple on the high pressure
pump and connect the suction tool.
Tool
Description Illustration
Suction tool
337 297
329 252