Scania DC16 - Component Identification; Engine

Component identification
OPM 300 en-GB 21
© Scania CV AB 2020, Sweden
Component identification
Engine
2
9
3
4
5
6
12
7
8
381 634
The illustration shows a normal version of a DC16 engine. The engine ordered may have different equipment.
1. Centrifugal oil cleaner
2. Oil filler
3. Oil dipstick
4. Nipples for draining and filling coolant (one on each side).
5. Fuel filter
6. Oil filter
7. Engine control units
8. Engine data plate and engine serial number, stamped into the cylinder block.
9. Oil plug