Scania DC16 User Manual

Lubrication system
OPM 300 en-GB 41
© Scania CV AB 2020, Sweden
Lubrication system
Oil grade
Scania LDF stands for the Scania Long Drain
Field test standard. Scania LDF oils have been
carefully selected after extensive testing. The ap-
proval is only granted to the highest grade engine
oils available on the market.
Recommended engine oils: Scania’s LDF and
Scania E7 oils.
IMPORTANT!
Regarding particulate filters, the information in
this document is not valid if an engine oil other
than Scania LDF-4 is used.
For fuels with a high sulphur content, the Total
Base Number (TBN) must be at least 12.
Particulate filter Oil grade
No
LDF-3
LDF-2
LDF
Scania Oil E7
ACEA E7/API CI-4
ACEA E5/API CI-4+
Yes
LDF-4
ACEA E6
ACEA E9
API CK-4
with ash content < 1%

Scania DC16 Specifications

General

Engine Type	Diesel
Displacement	16.4 liters
Fuel Type	Diesel
Configuration	V8
Bore x Stroke	130 mm x 154 mm
Compression Ratio	17.3:1
Fuel System	Common rail
Aspiration	Turbocharged
Turbocharger	Yes
Aftertreatment	SCR
Cooling System	Liquid-cooled
Weight	Approximately 1350 kg (dry weight)
Power Output	up to 770 hp