Starting and running
OPM 300 en-GB 31
© Scania CV AB 2020, Sweden
The components in the exhaust system may be-
come hot.
Make sure that there is no combustible material
near the exhaust pipe.
It is the operator’s responsibility to ensure that
the machine is in a safe location and safe condi-
tion when performing manual regeneration.
Examples of actions include:
- Applying the parking brake.
- Disengaging the generator set.
The symbol and behaviour of the warning lamp
depend on the installation of the engine in the
machine. The Scania recommendation will lead
to the behaviour and symbol described here, but
this may differ between different machines.
Warning lamp Description
Constant light The particulate filter is starting
to become full. Increase the
load to improve automatic re-
generation or regenerate the
particulate filter manually.
Flashes slowly
(½ Hz)
Carry out manual regeneration
as soon as possible.
Flashes rapidly
(2 Hz)
The particulate filter is over-
full. Manual regeneration can
only be carried out using
SDP3.
To Next Page
Loading...
