EasyManuals Logo

Scania DI16 XPI series User Manual

Scania DI16 XPI series
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Air cleaner
OPM 360 en-GB 34
© Scania CV AB 2017, Sweden
Renewing the safety cartridge
WARNING!
Never start the engine without the air filter being
in place. If you do, this could cause injury and se-
vere engine damage.
IMPORTANT!
When you renew the safety cartridge, take great
care to ensure that no dirt or other impurities get
into the engine. Do not remove the safety car-
tridge unnecessarily.
1. Remove the cover from the air cleaner.
2. Remove the filter element.
3. Remove the safety cartridge.
4. Fit a new safety cartridge from Scania.
5. Renew or clean the filter element.
6. Check the condition of the O-ring. Renew
the O-ring if it is damaged or hard.
7. Assemble the air cleaner. Ensure that the O-
ring is not outside the edges.
Renewing an air filter with a
non-renewable element
IMPORTANT!
If the engine has air filters with a non-renewable
Scania element, they should be renewed instead
of cleaned.
4
2
3
1
361 380
Air cleaner.
1. Cover.
2. Filter element.
3. Safety cartridge.
4. O-ring.
325 166
Air filter with a non-renewable element.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Scania DI16 XPI series and is the answer not in the manual?

Scania DI16 XPI series Specifications

General IconGeneral
BrandScania
ModelDI16 XPI series
CategoryEngine
LanguageEnglish

Related product manuals