OPM 360 en-GB 80
© Scania CV AB 2017, Sweden
Technical data
Technical data
General data
Lubrication system
Number of cylinders and configuration V 8
Working principle 4-stroke engine
Cylinder diameter (mm/in) 130/5.12
Piston stroke (mm/in) 154/6.1
Displacement (dm
3
/in
3
)
16.4/1,001
Firing order 1 - 5 - 4 - 2 - 6 - 3 - 7 - 8
Compression ratio 16.7:1
Engine direction of rotation viewed from rear Anti-clockwise
Fan direction of rotation viewed from front Clockwise
Cooling Coolant
Valve clearances, cold engine
Intake valve (mm/in) 0.45/0.018
Exhaust valve (mm/in) 0.70/0.028
Number of teeth on the flywheel 158
Low idling speed (rpm) 500-1,050
Maximum full-load speed (rpm) 2,300
Fuel Diesel
Approximate weight, without coolant and oil (kg/lb) 1,660/3,660
Oil volume See Maintenance
Oil cleaning Centrifugal oil cleaning
Oil cooler Coolant cooled, full flow
Oil filter Paper filter, full flow
Interval between oil changes (h) 500
Oil grade
Engines run on low-sulphur fuel ACEA E5 or E7
Engines not run on low-sulphur fuel Total Base Number (TBN) > 12
(ASTM D2896)
Oil pressure (bar/psi)
Normal with hot engine and nominal engine speed 3-6/43.5-87
Minimum permitted at idling speed 0.7/10.2
Crankcase pressure (mbar/psi) -5.4 to 2.0/-0.08 to 0.03
To Next Page
Loading...
Need help?
General
