Sceptre E24 User Guide

Page16 SCEPTRE E24
If You have HDMI Connection on Your Cable or Satellite Box…
1. Make sure the power of the E24 LED MONITOR is turned off.
2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end
to the back of the cable or satellite box.
3. Turn on the power of both the E24 LED MONITOR and the cable or satellite box.
Please Note:
 Make sure to set audio output from your cable or satellite box to PCM output.
 Please refer to the cable or satellite company for more information.

Sceptre E24 Specifications

General

Brand	Sceptre
Model	E24
Category	Monitor
Language	English