Sceptre E24 User Guide

Page18 SCEPTRE E24
PICTURE SETTINGS
This function adjusts the brightness and contrast of the LED Monitor.
1. To use this function, press MENU to open the OSD then highlight PICTURE SETTINGS
function by pressing the UP or DOWN button.
2. Press MENU again to enter the function.
3. Press UP or DOWN button to select BRIGHTNESS or CONTRAST to adjust.
4. Press MENU to select the option you want to adjust.
5. Use the UP or DOWN button to adjust the values.
Please Note:
 BRIGHTNESS adjusts the black level in a picture. If the value is adjusted too high,
the picture will look washed out. If too low, the picture will not have much detail in
dark colors.
 CONTRAST adjusts the white levels in a picture. If the value is adjusted too high,
the picture will not have any details in bright parts of the picture. If it sets too low,
the picture will looked washed out.
 DCR is a function that automatically adjusts the contrast for you depending
on the graphics displayed at the time.

Sceptre E24 Specifications

General

Brand	Sceptre
Model	E24
Category	Monitor
Language	English