How to fix unclear and unstable display on Sceptre monitor?
To stabilize and clarify the display on your Sceptre monitor, use the AUTO ADJUST function. Alternatively, set the resolution to the optimal setting of 1920 X 1080 at 60Hz, and then use AUTO ADJUST.
How do I reset my Sceptre E24?
To reset your Sceptre monitor, ensure there's a valid video signal, then press the menu button to open the OSD. Look for the ALL RESET option under the MISC. options.
Why I do not hear any sound from the speakers of my Sceptre E24?
If you're not hearing sound from your Sceptre monitor's speakers, first check the 3.5 mm mini-jack cable connection between your computer and the monitor. Then, verify the volume levels on both your computer and the monitor itself.
What to do if my Sceptre E24 has no LED display or says no video?
If your Sceptre monitor's LED display is blank or shows 'No Video', ensure you've selected the correct source. Check all available sources. Inspect the video cable for damage, and try a different cable. Also, verify the power plug is securely connected to both the monitor and the wall outlet.
How to fix no sound on Sceptre TV from PC?
If you're experiencing no sound on your Sceptre TV when connected to a PC, make sure you have a 3.5 mm mini-jack cable connected from your PC’s sound output to the TV’s VGA STEREO INPUT.
Why does my Sceptre TV turn on/off slowly?
Your Sceptre TV is a High Definition liquid crystal display panel TV. It requires a few more seconds than normal TVs to power up and show the picture.
How to fix weak signal or no program symbol on Sceptre TV?
If you're experiencing a weak signal or seeing a 'no program' symbol on your Sceptre TV, try changing the direction of your antenna and then rescan for channels. If you have cable, contact your cable provider to inquire about the strength of your local cable signal.
How to get more channels on my Sceptre TV?
If your Sceptre TV isn't receiving enough channels through the ATSC/NTSC tuner, change the direction of your antenna and rescan for channels. If you have cable, contact your cable company to inquire about the signal strength of your local cable.
What to do if there is audio but no picture on my Sceptre TV?
If you are getting audio but no picture on your Sceptre TV, ensure that both your video and audio cables are properly connected. Also, the TV’s tuner signal must not be lower than 65 %.
What to do if my Sceptre TV remote control does not work?
If your Sceptre TV remote isn't working, try these steps: Turn off the TV, unplug it, and remove the batteries from the remote for 30 seconds. Press the remote buttons and the power button randomly for 2 seconds, then reinstall the batteries. Also, ensure there's a clear line of sight between the remote's front sensor and the TV's remote sensor, which is located near the power indicator light.
General| Screen Size | 24 inches |
|---|---|
| Refresh Rate | 75Hz |
| Response Time | 5ms |
| Brightness | 250 cd/m² |
| Ports | HDMI, VGA |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Resolution Type | FHD |
| Viewing Angle | 178° (H) / 178° (V) |
| VESA Mount Compatible | Yes (75 x 75mm) |
To Next Page
