Operation
Page 4-4 BASO 1 MS - 02.04 - V02
4.4.3 Switching on the coffee machine
1. Turn on the coffee machine by pressing the [ ] button, or insert the CHEF
card into the card reader, if the service technician has programmed the ma-
chine accordingly. The green LED next to the [ ] button will illuminate.
2. If the coffee machine has been turned off for a long period of time, the following
message will appear:
If the service technician has programmed the machine to rinse automatically
when it is switched on, the following message appears:
The red LED next to the [
] button will flash during the rinse cycle.
3. As soon as the operating temperature has been reached, the following mes-
sage will appear:
• If the cleaning program was run before the coffee machine was switched off, a
rinse cycle is automatically run when the coffee machine is turned back on and, if
programmed to do so by a service technician, a sample coffee is served.
4.4.4 Preparing - DECAF products
If a service technician has installed and enabled the second product level, the product
buttons can be used to select decaf products:
- Level 1 for regular coffee
- Level 2 for DECAF coffee
No product can be programmed onto the
[
]
button.
The beverages delivered by the coffee machine are hot! To protect yourself
against scalding, keep hands and other body parts away from the outlet area
during the preparation and delivery of beverages.
1. Position one or two empty cup(s) underneath the coffee outlet.
2. Press the [ ] button.
The LED next to the pressed button illuminates.
3. Press the desired product button.
The LED next to the pressed button illuminates.
Flush time a
rox. 1 minutes
Aufheizzeit ca. 2 Minuten
Produkt wählen
Aufheizen
Heat-up time approx. 2 minutes
select product
heat up
select product
<< flush >>
select product
12:00 01.01.2005
Display example
select product
12:00 01.01.2005
select product
Pre select .. Serving ..
To Next Page
Loading...
Need help?
General
