Cleaning
Page 5-4 BASO 1 MS - 02.05 - V02
5.2.2 Automatic rinsing
The automatic rinsing is programmed by a Service technician
and is self starting.
5.2.3 Manual rinsing
1. Press the
button once.
5.2.4 Milk tube rinsing
1. Press the
button twice.
(LED of the cleaning button is illuminated).
2. Remove Milk container.
3. Fill the cleaning container with 100 ml of warm water (40 °C - 50 °C)
4. Press the
button.
The Milk tube rinsing takes about 10 seconds.
(5 seconds for the hot Milk tube / 5 seconds for the Milk foam tube).
We recommend a 'Milk tube rinsing’ if no milk products will be
dispensed for the next few hours.
rinse Milk system
rinse Milk system
rinse water
To Next Page
Loading...
Need help?
General
