Cleaning
BASO 1 MS - 02.05 - V02 Page 5-3
5.2 Daily cleaning
The intervals in which the cleaning program is to be carried out are programmed by
the service technician. When cleaning is required at pre-set time the display will show:
The automatic cleaning process starts again from the beginning if the coffee machine
is switched off or after a power outage.
Press [ ] button
If the cleaning program was run before the coffee machine was switched off, a rinse
cycle is automatically run when the coffee machine is turned back on and, if pro-
grammed to do so by a service technician, a sample coffee is served.
5.2.1 Inside Cleaning
Never use scouring tools, pads or abrasive agents, chemicals or cleaning tools made
of metal.
These devices could damage the smooth surfaces and leave behind traces in which
harmful germs are more likely to develop.
1 Wash and disinfect your hands thoroughly.
Cover open wounds.
Use protective gloves if necessary.
select product
cleaning program
<< Standby >>
select product
cleaning program
1
To Next Page
Loading...
Need help?
General
