Schaerer JDE Barista ONE - Operating the Coffee Machine; Machine Power On Procedures

BA JDE BARISTA ONE_EN
V01 | 07.2016
23
www.schaerer.comOperation
Operation
Check before switching on
► Before switching on the coffee machine, check whether the following conditions are ful-
filled.
Conditions for switching on the coffee machine:
• The main water valve (in machines with a mains water supply) is open/the drinking water
tank is filled with fresh water.
• The drip tray has been emptied and is correctly inserted/the waste water outlet is correctly
routed/the waste water tank is connected.
• The bean hopper(s) is/are filled and the lock is open.
• The grounds container is empty and inserted correctly.
• The coffee machine is connected to the mains power supply.
Switching on
Option 1: Barista ONE up to 2 kW
► Plug the power cord into the machine.
► Insert the power plug into the socket.
► Switch on the coffee machine using the main switch at the lower back of the machine (next
to the power supply connection).
Option 2: From standby mode
► Briefly press the button on the right side of the operating panel.
 The machine starts from standby mode.
 The main screen appears, and the machine begins to heat up.
 The machine is ready for use as soon as the required temperature is reached.
The figure shows the Barista ONE
with 2 kW and a removable power
cable
When the machine is switched on for the first time, a display-guided adjustment of the machine
configuration follows automatically.