Schaerer JDE Barista ONE - Outer Surface and Brewing Unit Cleaning

www.schaerer.com Cleaning
BA JDE BARISTA ONE_EN
V01 | 07.2016
48
Option 2: In self-service mode
► Button on right side ±6 sec.
 The "Service menu" appears.
► Select the [Touch cleaning] field.
 The display remains insensitive to touch for 30 sec.
► Spray a commercially available glass cleaner onto a paper towel.
► Clean the touch screen.
► If necessary, select the [Touch cleaning] field again.
 After 30 sec, the display is again ready for use.
Outer surfaces of the coffee machine
Option 1: In "Operated" mode
► Press the [Service menu] field on the touch screen (see figure).
 The "Service menu" appears.
Option 2: In self-service mode
► Button on right side ±6 sec.
 The "Service menu" appears.
► Press the [Standby] field.
 The machine switches to standby.
► Clean the outer surfaces of the coffee machine with a moist cloth.
► Briefly press the button on the right side.
 The main screen appears and the machine is ready for use.
As needed
Brewing unit
CAUTION!
User at risk!
Coffee residue in the brewing unit can quickly lead to the formation of mould. The
spread of mould spores in the machine results in the danger of contamination of the
coffee.
Check the brewing unit occasionally, depending on the operating times, and clean as
described when required.
CAUTION!
Risk of machine
damage!
High temperatures may lead to damage.
Never clean the brewing unit in the dishwasher.
► Opening the service doors
► Remove the grounds container.
► Remove the drip tray.
See "Main window touch screen" - "Open service door".