Schaerer JDE Barista ONE - Water Supply Management

BA JDE BARISTA ONE_EN
V01 | 07.2016
31
www.schaerer.comOperation
Option 1: Bean hopper without partition wall
► Remove the cover from the bean hopper.
► Pour in coffee beans (max. 1300 g).
► Reattach the bean hopper cover.
Option 2: Large bean hopper
► Remove the cover from the bean hopper.
► Pour in coffee beans with roast 1, e.g. "Coffee créma" on the left (max. 800 g).
► Pour in coffee beans with roast 2, e.g. "Espresso" on the right (max. 500 g).
► Reattach the bean hopper cover.
Water
► Open the machine service door.
Option 1: Internal/external drinking water tank
► Rinse out the drinking water tank thoroughly with fresh water every day.
► Clean the lid of the drinking water tank with fresh water.
► Fill the drinking water tank with fresh drinking water before using it.
► Reinsert the drinking water tank.
Option 2: Mains water supply
CAUTION!
Risk of machine
damage!
The machine can suffer damage if the pump runs dry.
Before switching on the machine, make sure that the main water valve is open.
► Open the stop valve on the main water valve.
See "Main window touch screen" - "Open service door".
Ensure that the filled drinking water does not touch the closed drinking water tank lid.
For reasons relating to insurance law, it is advisable that the main water valve be closed at the
end of the day.