BA JDE BARISTA ONE_EN
V01 | 07.2016
71
www.schaerer.comProgramming
Operator profile
The "Operator" has limited access to service functions.
The following main menus are contained in the "Service menu" [Settings] in the [Machine op-
erator] profile:
• System
• Service
In the [Operator] profile, the following functions are available for direct selection in the "Service
menu":
• Start rinsing
• Switch the milk system on/off
• Switch on quick info. (current boiler temperatures at the bottom right of the display)
• Settings
• Start cleaning
• Standby
• Touch screen cleaning (30 sec)
• Cleaning statistics
• Open service door
"Info" main menu
Parameter Description Setting range Notes
Machine/temporary counters Overview of all counter values of beverages
and beverage dispensing operations.
The machine and temporary counters can
only be deleted in total:
► Press the field.
– There is a difference bet-
ween user counters and
overall counters. User
counters can be deleted. It
is thus possible to allow
counters to run for a speci-
fic time. The total counters
cannot be deleted.
The contents of the main menus are subsequently described in this chapter.
"System" main menu
Parameter Description Setting range Notes
Maintenance Last filter change.
Date entry of last filter change.
► Highlight day, month and year in se-
quence.
► Set the required value using the up or
down arrow fields.
– The parameter is display-
ed if an external filter is
used.
"Service" main menu
Parameter Description Setting range Notes
Beverage selection symbol
See "Programming" – "Caretaker profile" –
"Beverage selection icon".
––
To Next Page
Loading...
