Schaerer JDE Barista ONE - Beverage Dispensing; Beverage Selection and Customization

BA JDE BARISTA ONE_EN
V01 | 07.2016
35
www.schaerer.comOperation
Option 3: Under-machine cooling unit
► Open the door.
► Remove and rinse the milk container.
► Pour in fresh, pre-cooled milk (3 – 5°C).
► Place the milk container into the cooling unit.
► Hang the hose into the container.
 The hose end must be in contact with the container floor.
► Close the door.
Dispensing
Adjusting the cup platform
If a large container is being used, e. g. for a Latte Macchiato, the adjustable cup platform must
be swivelled to the right:
► Grasp the cup platform, swivel it to the right.
► Place the cup on the cup platform on the drip tray.
Beverages
► Select the desired beverage field in the display.
 The beverage is dispensed immediately (with Barista ONE user interface).
 The progress of the beverage dispensing is shown on the display.
 The window for selecting beverage options opens (with MiniCoffeeKitchen user inter-
face).
Option 1: Beverage with options
► Select beverage options such as [REGULAR/LARGE] or [Extra shot of Espresso].
 The extra price for the additional option is directly displayed.
Ensure that the filled milk does not touch the closed milk container lid.
The [<] field at the top left of the display leads back to the beverage selection page without
making a selecting or dispensing.
The dispensing steps for the selected beverage are dependent on the selected user interface.