Schaerer JDE Barista ONE - Hot Water Dispensing Methods

BA JDE BARISTA ONE_EN
V01 | 07.2016
37
www.schaerer.comOperation
► Move the cup platform into place.
► Place the cups on the platform and position them under the beverage outlet.
► Press the desired beverage field.
 The progress of the beverage dispensing is shown on the display.
► Remove the cups after the beverage is dispensed.
Hot water
Option 1: Hot water via a beverage field
CAUTION!
Hot fluid!
► Place a cup/glass under the beverage outlet.
► Press [Hot water] beverage field (see figure).
 The progress of the beverage dispensing is shown on the display.
► Remove the cup/glass after the beverage has been dispensed.
Option 2: Hot water via the Hot water dispensing button
► Place a cup/glass under the hot water outlet.
► Press the Hot water button.
 Hot water is dispensed in the configured quantity.
See also "Operation" - "Dispensing" - "Beverages".
The dispensing mode for the Hot water button can be configured in different ways by a service
technician.