www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
|
27
Attention!
There is a risk of burns. Do not trans-
port the machine until the motor unit (23) has cooled
(3b).
15. Storage
and frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5 and
Store the tool in its original packaging.
Cover the tool to protect it from dust or moisture.
Store the operating manual with the tool.
16. Disposal and recycling
The device is supplied in packaging to avoid trans-
port damages. This packaging is raw material and
can thus be used again or can be reintegrated into
-
ent materials, such as metals and plastics. Take de-
fective components to special waste disposal sites.
-
istration!
Do not throw old equipment away with household
waste!
not be disposed of in household waste as per
-
This
product must be handed over at the intended collec-
tion point.
it when purchasing a similar product or delivering it to
electrical and electronic devices.
-
ronment and on human health due to potential haz-
ardous materials which are often contained in old
electrical and electronic devices.
-
fective use of natural resources.
authorised location for the disposal of old electrical
-
vice.
Such damaged electrical connection cables must not
be used and are life-threatening due to the insulation
damage.
Check the electrical connection cables for damage
Ensure that the connection cables are dis-
connected from electrical power when checking for
damage.
-
-
AC motor
• The mains voltage must be 230 V~.
• Extension cables up to 25 m long must have a
cross-section of 1.5 mm
2
.
Connections and repair work on the electrical equip-
Please provide the following information in the event
•
•
•
13. Cleaning and maintenance
General maintenance tasks
time with a cloth.
to extend the life of the tool. Do not oil the motor.
Do not use corrosive agents for cleaning the plastic.
Maintenance
The device has no further internal parts that require
maintenance.
Service information
-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
14. Transport
-
and set it down in another appropriate area.