www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
|
21
4
– Do not allow other persons to touch the equip-
area.
5
–
elevated or closed location out of the reach of
children.
6
– -
7
–
work.
– Do not use the electric tool for purposes for
use handheld circular saws for the cutting of
branches or logs.
–
8
–
can become entangled in moving parts.
–
recommended.
– Tie long hair back in a hair net.
9
–
–
work.
10
processing wood, materials similar to wood, or
plastics.
– -
–
wood, and plastics. operation in enclosed spac-
11 Secure the workpiece
–
–
workpieces (table, trestle, etc.) in order to pre-
vent the machine from tipping over.
–
the working plate and stop in order to prevent
bouncing and twisting of the workpiece.
12 Avoid abnormal posture
–
– Avoid awkward hand positions in which a sud-
den slip could cause one or both hands to come
into contact with the saw blade.
13
– Keep cutting tools sharp and clean in order to
4. Proper use
The lathe is used for working wood with suitable
wood-turning chisels.
-
Please refer to the
following descriptions for the function of the controls.
The machine complies with the applicable EC ma-
• -
tions of the manufacturer, as well as the dimen-
-
served.
• The applicable accident prevention regulations
be observed.
• -
it and have been informed of the dangers. -
•
accessories and original tools from the manufac-
turer.
• The manu-
facturer is not responsible for the resultant dam-
ages, the user bears this risk alone.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes.
is used in commercial or industrial applications, or for
equivalent work.
5. General safety information
be observed when using electric tools for protection
Safe work
1
– Disorder in the work area can lead to accidents.
2
– Do not expose electric tools to rain.
– Do not use electric tools in a damp or wet en-
vironment.
– -
ed.
– Do not use electric tools where there is a risk
3
–
pipes, radiators, electric ranges, cooling units).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
