Scheppach SG3500i - Generator Maintenance Schedule; Planned Maintenance Task Intervals

www.scheppach.com
38
|
GB
15. Maintenance plan
Always comply with the following maintenance intervals in order to ensure problem-free operation.
ATTENTION! At initial start-up, engine oil and fuel must be lled.
Before
every use
after operating for 20
hours
after operating for 50
hours
after operating for 300
hours
Checking the
engine oil
X
Changing the
engine oil
rst time, then every
50 hours
X
Checking the air
lter
X
Change lter insert if
necessary
Cleaning the air
lter
X
Visual inspection of
the device
X
Cleaning the spark
plug
Gap: 0.6 - 0.7 mm,
replace if necessary
Check and readjust
the throttle valve
X*
Cleaning the
cylinder head
X*
Adjust the valve
play
X*
Attention: Only have points “X*” carried out by an authorised specialist company.