www.scheppach.com
GB
|
23
1. Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of am-
mable liquids, gases or dust. Power tools create
c) Keep children and bystanders away while op-
erating a power tool.
to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
hearing protection used for appropriate conditions
•
on the machine.
•
notices on the machine are complete and in legible
condition.
•
and hazards!
-
• -
-
en in the technical data must be observed.
• Relevant accident prevention regulations and oth-
must also be observed.
•
with it and have been informed of the dangers.
-
-
ed.
•
accessories and original tools from the manufactur-
er.
• The manufac-
turer is not responsible for the resultant damages,
the user bears this risk alone.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
6. General safety information
General power tool safety warnings
m WARNING!
Read all safety warnings, instructions, illustra-
tions and specications provided with this power
tool.
Save all warnings and instructions for future ref-
erence.
-
ed (cordless) power tool.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
