Scheppach Tiger 2500 Translation Of Original Instruction Manual

www.scheppach.com
30
|
GB
16. Troubleshooting
Problem Possible cause Remedy
Engine does not run. Engine, cable or connector
defective, fuses burnt.
 Never
 Attention! Check the


and does not reach the
operating speed.
Voltage too low, coils
damaged, capacitor burnt.

 Have the

Engine producing
excessive noise.
Coils damaged, motor
defective.

Engine does not reach
full power.
Circuits in the network are
overloaded (lamps, other
engines, etc.)

same circuit.
 Overloading of the engine,
󰀩
engine.
Avoid overloading the engine during grinding and
remove dust from the engine to ensure optimum
engine cooling.
Just in case.
8949 0705


Scheppach Tiger 2500 Specifications

General

Input power	200 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Idle speed (max)	- RPM
Multi-tool applications	Grinding

Weight and Dimensions

Depth	320 mm
Width	325 mm
Height	335 mm