www.scheppach.com
GB
|
27
Service information
Please note that the following parts of this product are
therefore also required as consumables.
Wearing parts *: Grindstone, honing paste, leather
honing wheel, angle gauge, friction wheel
Spare parts and accessories can be obtained from our
service centre. To do this, scan the QR code on the
cover page.
12. Storage and transport
Store devices and accessories out of the reach of chil-
The
optimum storage temperature lies between 5 and 30
°C. Store the power tool in its original packaging. Store
m Attention!
It is essential that the device is secured against falling
or tipping over during transport.
frame.
13. Electrical connection
m
for operation.
The connection complies with the applicable VDE and
DIN provisions.
The customer’s mains power connection as well
as the extension lead used must also comply with
these regulations and the local electricity supplier
regulations.
Damaged electrical connection cables
The insulation on electrical connection cables is often
damaged.
Possible causes:
• Pressure points, where connection cables are
passed through windows or doors.
• Kinks where the connection cable has been improp-
• Places where the connection cables have been cut
due to being driven over.
• Insulation damage due to being ripped out of the wall
outlet.
the device on the universal support, turn on the motor,
and start the grinding process. Press the tool even-
move it crosswise across the stone. Please make sure
that at least half the width of the cutting edge comes
damages of the stone.
-
er.
Sharpening (Fig. 8)
Never sharpen against the direction of grinding! Other-
wise, the tool will cut into the leather!
Impregnate the leather disc using weak machine oil.
pressing the ground tool with circular movements on
the wheel.
-
tools.
Expert tip: You can work in the free-handed mode for
the trimming itself. You achieve a more precise result if
11. Cleaning and maintenance
m Warning!
-
fore performing setting, maintenance or service work!
Cleaning
-
gine housing free from dirt and dust insofar as possible.
with compressed air at low pressure.
each use.
Maintenance
The device has no further internal parts that require
maintenance.