Schiller AT-1 - Paper Tray Assembly and Thermal Printer

Chapter 4
Module Removal and Replacement
SCHILLER
AT-1 3-Channel ECG Unit
SERVICE HANDBOOK Issue 3 September I999
CWWHEEL
(4. 430 118)
AND ROLLER
BEARING
(4. CO 168)
Paper Tray Assembly and Thermal Printer
PRINTHEAD i
4. 143 115
I
i
Prerequisite
The Warnings and Cautions at the beginning of the Chapter must be observed
The Top Assembly must be removed as detailed previously. All external cable assemblies
must be disconnected.
Tools
Cross-bladed screwdriver
Flat-bladed screwdriver
Rat ended pliers
Part Numbers
The part numbers for the Thermal Printer Assembly, the print head and the motor are given in
Chapter 6.
CAUTION
THE THERMAL PRINTER CONTAINS IS STATIC SENSI'ITW OBSERVE ANTISTATIC
PRECAUTIONS
Page 4.14