Schiller AT-1 - Software and Settings

SCHILLER AT-] 3-Channel ECG Unit
SERVICE hWWBOOK Issue 3 September 1999
Chapter 5
Adjustments
Software and Settings
The software version of the unit and the options installed are printed on the bottom of all printouts.
The only option available is the measurements option: an M is printed. To obtain a printout of ail
settings press rhe following key sequence:
ALT - 0 - 1 - any key
Details of all sertLtgs are given in the AT-I User Guide.
instailing Software options
To update the AT-1 from. for example standard to M version type the following:
ALT - 0 - 4 - followed by the update code (obtainable from Schiller)
Acceptance of the code is indicated by a series of beeps.
CAUTION
MORE THAN 10 AlTEMPTS TO ENTER THE INCORRECT CODE BLOCKS THE UNIT
Page 5.1 1