A Lockcase and mounting screws
B Spindle and spring
C Outside lever and rose
D Mounting posts
E Spring cage or spacer
F Occupancy indicator
G Inside mounting plate & screws
H Inside lever
J Inside thumbturn
K Cylinder, compression ring and
spring
L Inside rose
N Emergency turn and button
P Coin turn
Q Ar
mor front and screws
Z Blocking ring
Lever and Rose
IMPORTANT: Before installation of any L/LV Series lock,
check lock handing. (See door handing section.)
1
All functions
Fully tighten
at step 9
2
All functions
3
All functions
IMPORTANT: If spacer is supplied, install now.
Fully tighten mounting
posts on screws
Arrow in direction of
lever down rotation