Schlage L463 - N Escutcheon Trim; Outside Escutcheon Dimensions; Inside Escutcheons

L Service Manual
94
N Escutcheon Trim
Outside Escutcheon Dimensions
(Bushing attached at factory)
Outside Escutcheons
Inside Escutcheons
(Includes two (2) screws and mounting plate.)
NOTES: When ordering trim parts, specify the complete design and finish (e.g. 09-402 03N 605).
See Schlage Commercial Price book for available finishes.
Knob/Lever Design
ABC
A
41, 42
B
01, 02, 03, 05,
06, 07, 12, 17, 18
C 9 3 , AC C, A S T, M ER ,
OME, STA
8" x 2⁹⁄₁₆" x ⁷⁄₁₆" Brass or Stainless Steel Base Material
09-636 Blank x Knob/Lever
09-637 Emergency Turn x
Knob/Lever
09-639 Full Face Cylinder x
Knob/Lever
XL11-636 Blank Outside
For all except 93N specify 09-636 or
09-550 with knob/lever. Specify
09-650 with knob/lever for 93N.
For all except 93N specify 09-637 or
09-551 with knob/lever. Specify
09-651 with knob/lever for 93N.
For all except 93N specify 09-639 or
09-553 with knob/lever. Specify
09-652 with knob/lever for 93N.
Specify XL11-636 00N and
finish.
09-632 Blank x Knob/Lever 09-633 Thumbturn x Knob/Lever 09-635 Full Face Cylinder x Knob/Lever
Specify door
thickness:
1³⁄₈'' or 1³⁄₄''.
1¹⁄₂"
⁹⁄₁₆"
1"
⁷⁄₈"
³⁄₄"
⁷⁄₈"