SCHUBERTH M1 User Manual

H. ACCESSORIES AND SPARE PARTS
46 47
EN
1. COMMUNICATIONS SYSTEMS
The helmet comes standard equipped for compatibility
with the SCHUBERTH SRC system™ — the necessary
microphones, loudspeakers and cables are pre-installed,
so no manual installation is necessary. Information on
the SCHUBERTH SRC System™ is available from
specialised dealers or at.
www.SCHUBERTH.com
Warning:
Any installation and/or mounting of communication systems (excepting the SRC
System™), simple headsets, helmet cameras and/or other mount-on parts on or in the
helmet fundamentally represent a modication of the helmet. As such, the respective
communication systems, headsets, helmet cameras and/or other mount-on parts must
be specially inspected and approved for installation into the specic helmet model in
accordance with the European helmet standard (ECE-R 22.05). In almost all cases the
approval and insurance conformity of the helmet is invalidated by any such installation.
The documentation for approval of the helmet based on ECE-R 22.05 –
in communication with a special communication system – is only valid if it is based
on documents from an ocial approval agency of the EU country. Other information
from this institution (such as the general suitability of communication systems for use
in motorcycle helmets) or information from other institutions have no relevance in this
case and the helmet‘s approval is considered invalidated.
2. ACCESSORIES AND SPARE PARTS
Only original accessories and original replacement parts from SCHUBERTH are recommen-
ded for the helmet, as it is assured that they are tailored optimally for it. These are available
from specialised retailers. You can nd the closest SCHUBERTH specialised dealer on the
internet at www.SCHUBERTH.com.
Warning:
For safety reasons, all replacement parts and helmet components not available from
the specialised dealer should only be installed by the SCHUBERTH Service team.
Your specialised dealer would be happy to arrange this service for you.
Warning:
Original components (including in particular the outer shell, inner shell and retention
system) may neither be modied nor removed. Any application of non-recommended
third-party add-ons can impair the protective function and invalidates the ECE
approval as well as all guaranty and insurance claims.
Warning:
Only original SCHUBERTH accessories and replacement parts and accessories
explicitly approved by SCHUBERTH for use with this helmet may be used!

SCHUBERTH M1 Specifications

General

Helmet Type	Open Face
Shell Material	Fiberglass
Visor	Integrated Sun Visor
Standard	ECE 22.05
Communication System	Optional
Ventilation	Adjustable
Interior	Removable and washable
Closure	Micro-lock ratchet