Maintenance
34
01.00 | ECG | Assembly and Operating Manual | en | 389769
8 Maintenance
8.1 Maintenance intervals
NOTE
Any repair work on the product or accessories may only be carried
out by SCHUNK.
Maintenance interval Maintenance work
Regular Check product for damage and replace
if necessary.
As required Clean the product dry.
8.2 Check and repair the product
CAUTION
Damage caused by faulty disassembly and assembly!
Incorrect disassembly and assembly can cause damage to the
product and/or accessories.
• The product and/or accessories may only be checked and
repaired by SCHUNK.
To Next Page
Loading...
