SCHUNK MPG Series - Page 22

Assembly
22
09.00 | MPG | Assembly and Operating Manual | en | 389213
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length Permissible unevenness
< 100 < 0.02
> 100 < 0.05
Connections at the
product
The product can be mounted from three sides.
When selecting the mounting screws, observe the values
prescribed by SCHUNK, see table below.
Adapter plate
Assembly options